MIL-S-8699
MIL-S-8699 Military Specification (MilSpec) 4330M Low Alloy Steel
Steel Bars. Steel Forging Stock. 0.88 Cr, 1.8 Ni, 0.42 Mo, 0.08 V, 0.28-0.33 C.
4330M Low Alloy Steel in Department of Defense MilSpec MIL-S-8699 Specification, a version of AMS-6411 per SAE International:
“This specification covers an aircraft quality, low alloy steel in the form of bars, forgings, mechanical tubing, and forging stock. These products have been used typically for parts requiring a combination of high tensile strength and good ductility with relatively high impact strength and hardness, but usage is not limited to such applications. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment. ARP1110 recommends practices to minimize such conditions.”
Rapid Response RFQ
Contact Us Now to get 4330M in MIL-S-8699 Spec
- 13-8MO Stainless Steel
- 15-5PH Stainless Steel
- 17-4PH Stainless Steel
- 300M & 4340M Alloy Steel
- 316 Series Stainless Steel
- 321 Stainless Steel
- 400 Series Stainless Steel
- 4130 Alloy Steel
- 4330M Alloy Steel
- 4340 Alloy Steel
- 455 Stainless Steel
- 6al/4v Alpha/Beta Titanium Alloy
- A-286 Stainless Steel
- HP9-4-20 High Strength Alloy Steel
- HP9-4-30 High Strength Alloy Steel
- All Grades