THE METAL BUYERS’
TRUSTED RESOURCE

ASTM A564 (17-4PH)

ASTM A564 Specification 17-4PH Stainless Steel (XM-12 / 15-5PH here)

Stainless Steel Bars. Stainless Steel Wire. Stainless Steel Forgings. Stainless Steel Tubing. Stainless Steel Rings. 16 Cr, 4.0 Ni, 0.30 Cb Ta, 4.0 Cu.

17-4PH Stainless Steel in ASTM A564 Specification, per ASTM International:
“This specification covers bars and shapes of age-hardening stainless steels. Hot-finished or cold-finished rounds, squares, hexagons, bar shapes, angles, tees, and channels are included. These shapes may be produced by hot rolling, extruding, or forging. Type 631 and 632 stainless steels contain a large amount of ferrite in the microstructure and can have low ductility in forgings and large diameter bars. Material of types other than XM-16, XM-25, and Type 630 shall be furnished in the solution-annealed condition, or in the equalized and oven-tempered condition. Types 630, XM-16, and XM-25 may be furnished in the solution-annealed or age-hardened condition. Type UNS S46910 shall be furnished in solution annealed, cold-worked or aged-hardened condition. Shapes may be subjected to either Class A or Class C preparation for removal of visible surface imperfections. The material shall be subjected to tension, impact, and hardness tests.”

Hot-rolled. Cold-finished. Age-hardening stainless steel.

Rapid Response RFQ

Contact Us Now to get 17-4PH Stainless in ASTM A564 Spec:

    Please send us information on what you are looking for and a friendly, knowledgeable member of our team will contact you as soon as possible.

    *Required Fields